201 KAR 14:110. School equipment; plant layout

      Section 1. Each barber school must send the board a certificate from the zoning commission and a certificate from a licensed electrician or electrical firm showing the electrical equipment to be properly installed, properly grounded, and in safe operating condition.

 

      Section 2. Barber schools must be completely equipped with standard tonics, dyes, tints, bleaches, shampoos, cosmetics, permanents, etc., all electrical devices and other equipment for the proper instruction of students, as well as with equipment and supplies for sanitation and hygiene.

 

      Section 3. Barber schools must be so located as to be entirely separated and have no connection with any beauty or barber shop or any other place of business.

 

      Section 4. No barber school will be approved by this board having a space less than six (6) feet square for each student enrolled therein.

 

      Section 5. All accredited barber schools shall have a suitable and separate room to be used for demonstration and study, said room to have necessary charts and equipment to carry out the curriculum. The following equipment is required for this room:

      (1) Sufficient charts, blackboards, etc., to teach all subjects of barbering.

      (2) Sufficient classroom chairs with armrests, or desks, that will enable the student to take notes.

 

      Section 6. Every barber school is required to maintain a separate lavatory and toilet for male and female students.

 

      Section 7. All barber schools must comply with city and state building codes and zoning commission codes.

 

      Section 8. Lockers, dressing rooms and restrooms must be provided.

 

      Section 9. Booths and partitions in the work department shall be sufficiently low to permit the observation of students while they are working.

 

      Section 10. No school of barbering will be approved by the board having less than the following equipment: shampoo bowls; dryers; manicure tables; (a liquid sterilizer is required on each manicure table) hair cutting chair; wall plates; covered waste containers; individual paper towels; and containers for the use of students.

 

      Section 11. (1) Each barbering school is required to furnish a supply or dispensing room in which each student may obtain actual experience for a period of one (1) to three (3) weeks, as indicated by the course of instruction. The student will be directly responsible to the owner for any damage incurred due to the student's negligence or willful destruction while working in the supply or dispensing room.

      (2) Supply or dispensing and sterilization room equipment required for a barbering school:

      (a) Supply of clean linens, neck cloths, etc.

      (b) Lavatory for washing all combs, instruments, containers, etc.

      (c) Bottles and containers in use must be distinctly and correctly labeled.

      (d) Wet sterilizer.

      (e) Dry sterilizer.

      (f) Manicuring sterilizer.

      (g) Soap dispenser.

      (h) Covered waste container.

      (i) Cabinet for supply of clean linens.

      (j) Covered containers for soiled linens.

      (k) Cabinets for accessories.

      (l) Individual paper towel container.

      (m) Manicuring cups for preparation of solution from stock supplies.

      (n) Various solutions and preparations used. (KBB:Sch:Eqmt-1; 1 Ky.R. 728; eff. 5-14-75; Am. 10 Ky.R. 899; eff. 2-1-84.)

Notation

      RELATES TO: KRS 317.410, 317.440

      STATUTORY AUTHORITY: KRS 317.430, 317.440

      NECESSITY, FUNCTION, AND CONFORMITY: Barber school equipment and plant layout requirements.